Datasheet4U Logo Datasheet4U.com

MAX14882 - 5k VRMS Isolated CAN Transceiver

General Description

The MAX14882 isolated high-speed CAN transceiver improves communication and safety by integrating galvanic isolation between the CAN-protocol controller-side (TDX, RXD) of the device and the physical wires of the CAN network (CANH, CANL) cable-side/bus-side of the transceiver.

Key Features

  • additional integrated protection for robust communication. The ±25V receiver input commonmode range exceeds the ISO 11898 specification requirement of -2V to +7V. Additionally, the CANH and CANL IOs are fault tolerant up to ±54V and are protected from electrostatic discharge (ESD) up to ±15kV to GNDB on the bus-side, as specified by the Human Body Model (HBM). Interfacing with CAN-protocol controllers is simplified by the wide 3.0V to 5.5V supply voltage range (VDDA) on the controller-side of th.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX14886 Dual DisplayPort Graphics Multiplexer Maxim Integrated Products
MAX1488E 15kV ESD-Protected / Quad / Low-Power RS-232 Line Driver Maxim
MAX148 +2.7V to +5.25V / Low-Power / 8-Channel / Serial 10-Bit ADCs Maxim
MAX14800 High-Voltage Analog Switches Maxim Integrated Products
MAX14801 High-Voltage Analog Switches Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX14880 2.75kV and 5kV Isolated CAN Transceivers
MAX14885E Low-Capacitance VGA 2:2 Dual-Graphics Crossover Switch
MAX14803A High-Voltage Analog Switches
MAX14808 Octal Three-Level/Quad Five-Level High-Voltage 2A Digital Pulsers
MAX14809 Octal Three-Level/Quad Five-Level High-Voltage 2A Digital Pulsers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX14882 EVALUATION KIT AVAILABLE 5kVRMS Isolated CAN Transceiver with Integrated Transformer Driver General Description The MAX14882 isolated high-speed CAN transceiver improves communication and safety by integrating galvanic isolation between the CAN-protocol controller-side (TDX, RXD) of the device and the physical wires of the CAN network (CANH, CANL) cable-side/bus-side of the transceiver. Isolation improves communication by breaking ground loops and reduces noise where large differences in ground potentials exists between ports. The MAX14882 provides up to 5000VRMS (60s) of galvanic isolation and a continuous working voltage of up to 848VRMS, while operating at the maximum high-speed CAN data rate of 1Mbps.